Extremely powerful

3-phase energy meter

Reduce energy consumption

Qubino 3-Phase Smart Meter is used for energy measurements in three-phase electrical power network.
It reduces energy consumption, lowers your utility bills and improves efficiency in residential, industrial and utility applications.

How can you use 3-Phase Smart Meter?

The 3-Phase Smart Meter can be used in many different scenes, which can help make your life more comfortable.
There are countless of options for how to use Qubino 3-Phase Smart Meter to remotely measure power consumption
of your household or connected devices.

  • Track power consumption of the whole house and measure 9 different electrical values.

  • Track power consumption of one 3-phase electrical device (3-phase heat pump for example) and measure up to 9 different electrical values.

  • Track power consumption of one 3-phase electrical device (induction oven for example) and measure up to 9 different electrical values.

  • Measure 3 different electrical values (V, A, W) on each phase, plus 5 electrical values in common (Kwh, Kvar, KVarh, kVAh, PF).

  • Remotely control and measure 3 phase power consumption of one electrical device. The device (heat pump for example) can be controled with an external contactor.

  • Remotely control and measure 3 phase power consumption of one electrical device. The device (induction oven for example) can be controled with an external contactor.

  • Remotely control and measure 3 phase power consumption of one electrical device (for example: accurate information of electrical car energy consumption). The device (for example: electical charger for electrical car) can be controled with an external contactor.

  • Remotely measure power consumption of whole house and control one group of electrical devices (for example: lights) with external contactor.

  • Track power consumption for each of three electrical devices and control two groups of electrical devices (for example: 3-phase heat pump and lights) with external contactors.

  • Remotely measure power consumption of whole house and control two groups electrical devices (for example: 3-phase heat pump and lights) with external contactors.

Top Advantages

It is extremely versatile and powerful Z-Wave device for measuring energy in a three-phase electrical power network of up to 3 x 65A.

The only three-phase smart meter worldwide which allows connection of additional relay contactors and DIN rail support.

Some devices in your household consume too much energy

The 3-Phase Smart Meter can automatically turn devices/lights off after they exceed the set power consumption. For example, the heating will automatically turn off after it reaches the set power consumption value. This function is independent of other scenes and gateway (hub) commands.

Control other devices in your Z-Wave network

Connect the 3-Phase Smart Meter with other devices in your network to remotely and automatically trigger another Z-Wave device. And have other Z-Wave devices trigger your Qubino 3-Phase Smart Meter.

The simplest installation

There is no simpler installation than DIN rail installation – and the Qubino 3-Phase Smart Meter is a DIN rail mounted device.

Technical specifications

Main terminals (L1I, L2I, L3I, NI, L1O, L2O, L3O, NO)
Contacts capacity: 2.5 ... 16 (25) mm2
Connection screws: M5
Max torque: 3.5 Nm (PZ2)
Optional terminals (DI, DO)
Contact capacity: 1 ... 2.5 mm2
Screws: M3
Max torque: 1.2 Nm
Measuring input:
Type (connection): three phase (4u)
Basic current (Ib): 5 A
Maximum current (Imax): 65 A
Minimum current (Imin): 0.25 A
Starting current: 20 mA
Nominal voltage (Un): 230V (+15-20%)
Power consumption at Un: < 8 VA
Nominal frequency (fn): 50 and 60 Hz
Accuracy:
Active energy and power:
Standard EN 62053-21: class 1
Standard EN 50470-3: class B
Reactive energy:
Standard EN 62053-23: class 2
LED:
Colour: red
Pulse rate: 1000 imp/kWh
Led on: no load indication
Optical communication:
Type: IR - used to control BICOM432-40-IR
Digital Input (16):
Rated voltage: 230 V (± 20%)
Digital Output (15):
Rated voltage: 230 V (± 20%)
LCD:
Display 7+1 digit (100Wh resolution)
Safety:
Indoor Meter: yes
Degree of pollution: 2
Protection class: II
AC voltage test: 4 kV
Installation Category: 300 VRMS Cat. III
Standard: EN 50470
Ambient conditions and EMC: Meets standards for indoor active energy meters. Temperature and climatic conditions to EN 62052-11
Ambient conditions and Safety: Meets standards for indoor active energy meters. Temperature and climatic conditions to EN 62052-11
Dust/water protection: IP20
Operating temperature: -10 ... 55°C
Storage temperature: -40 ... 70°C
Enclosure material: self-extinguishing
complying UL94 V
UL94 V compliant yes
Indoor meter: yes
Degree of pollution: 2
AC voltage test: 4 kV
Standard: EN 50470
Distance: up to 30 m indoors (depending on building materials)
Weight (with packaging): 220 g (240 g)
Frequency range: 868.4 MHz*, Z-Wave
Installation Din rail 35 mm (EN 60715)
Dimensions (WxHxD): 53,6 x 84 x 65 mm
Package dimensions (WxHxD): 56 x 86 x 70 mm
Colour: RAL 7035
EC Directives conformity:
EC Directive on Meas. Instruments 2004/22/EC
EC Directive on EMC 2004/108/EC
EC Directive on Low Voltage 2006/95/EC
EC Directive WEEE 2002/96/EC

*Depends on ordering code

Incredibly fast support. Free.

We know that when you need information you need it quickly. That is why we offer a live customer service helpline, where you can get instant answers to all your questions. Free. All our support and training is personalized and free of charge.

The most tested and most reliable

Did you know that Qubino offers Z-Wave devices with 100% quality control guaranteed throughout the production process? Every single unit is tested and examined before being approved for sale – a truly unique pledge in the industry.

Every device has a dedicated serial number and part number, which is assigned to the device only after it goes through a strict testing procedure.

Additional parameters for pros.

There are 16 additional parameters for expert users. Some of the most useful are:

  • Input switch function selection
  • Automatic turning on/off external relay after output set time
  • Reporting in Watts on power change or by time intervals

What do you get?

Practical Light cardboard packaging ensures lower cost of delivery.
The package contains 1 module and 1 user manual.

Package dimensions (WxHxD): 53,6 x 84 x 65 mm
Gross weight (including packaging): 240g