World's smallest double relay switch

FLUSH 2 RELAY

The Qubino Flush 2 Relay is ideal for switching on or off two electrical devices. You can control it either remotely through the Z-Wave network or through wall switches. It also measures the power consumption of two electrical devices and supports the connection of a digital temperature sensor.

What is it used for?

The Qubino Flush 2 Relay is ideal for remotely controlling up to two electric devices (door locks, door openers, fans, etc.) or lights.

Lights Fan

The smallest of them all.

The Qubino Flush 2 Relay occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino Flush 2 Relay can measure the power consumption of both connected electrical devices separately and itself has an extremely low power consumption of less than 0.4 W.

Remarkably versatile.

The Qubino Flush 2 Relay can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F). It supports the connection of a digital temperature sensor, which means you can create complex scenes and switch any device relative to a set temperature range. Every module also act as a repeater in order to improve the range and stability of the Z-Wave network.

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

dose installation

Incredibly fast support. Free.

We know that when you need information you need it quickly. That is why we offer a live customer service helpline, where you can get instant answers to all your questions. Free. All our support and training is personalized and free of charge.

The most tested and most reliable module.

Qubino modules are "install-and-forget" products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

Electrical diagram 230VAC Electrical diagram 24VDC

Power supply 110 - 230 VAC ±10%
50 / 60 Hz, (24–30 VDC)
Rated load current of AC output (resistive load)* 2 X 4 A / 230 VAC
Rated load current of DC output (resistive load) 2 X 4 A / 30 VDC
Output circuit power of AC output (resistive load) 2 X 920 W (230 VAC)
Output circuit power of DC output (resistive load) 2 X 96 W (24 VDC)
Power measurement accuracy P = 0-200 W, +/- 2 W
P > 200 W, +/-3%
Digital temperature sensor range
(sensor must be ordered separately)
-50° ~ +125°C
Operation temperature -10° ~ +40°C
Distance up to 30 m indoors
(depending on building materials)
Dimensions (WxHxD) 41.8 x 36.8 x 16.9 mm
(packaging) (79 x 52 x 22)
Weight (including packaging) 28 g (34 g)
Electricity consumption 0.4 W
For installation in boxes Ø ≥ 60 mm or 2 M, depth ≥ 60 mm
Switching Relay (2x)

* In the case of loads other than resistive, pay attention to the value of cosφ and if necessary use a load lower than the rated load. Max current for cosφ = 0.4 is 2 A at 250 VAC, 3 A at 24 VDC.

Supported Z-Wave Frequencies

ORDERING CODE FREQUENCY
ZMNHBD1 868.42 MHz
ZMNHBD2 921.42 MHz
ZMNHBD3 908.42 MHz
ZMNHBD4 869 MHz
ZMNHBD5 916 MHz
ZMNHBD8 865.2 MHz
Additional parameters for pros

Additional parameters for pros.

There are 17 additional parameters for expert users. Some of the most useful are:

  • Setting mono-stable or bi-stable switches
  • Automatic turning off/on output after set time
  • Saving the state of the relays after a power failure
  • Setting normally open (NO) or normally closed (NC) output switch selection

What do you get?

Practical blister packaging ensures lower cost of delivery.
The package contains 1 module and 1 user manual.

Package dimensions (WxHxD): 79 x 52 x 22 mm
Gross weight (including packaging): 34 g