Flush 1 Relay - Compatibility specification | Qubino
Where to buy
Fill the form to download the product manual

Flush 1 Relay – Compatibility specification

At Qubino we are regularly executing compatibility tests of our devices with Z-Wave gateways from different manufacturers.
Check the results in the table below.

Please note that the gateway (hub) compatibility was updated on 14.3.2018 and it may not include the latest testing data.

Supports Unsupported Check comment Testing Q1, Q2, … Module physical output I1, I2, … Module physical input
# Gateway ON/OFF W kWh I2 physical input I3 physical input Temperature Comments Date of last test
1 Zwave me When endpoints are disabled and no temperature sensor is present remove multi-channel association in group 1 and set association in group 1. 4/23/2018
2 Cockpit
3 Fibaro HC Lite v 4.130 5/4/2018
4 Zipabox 1.3.24 Reinclude the device after first inclusion for maximum compatibility, temperature sensor needs additional setup. 5/30/2018
5 Vera edge v 1.7.350 4/23/2018
6 SmartThing 4/18/2018
7 Devolo 4/18/2018
8 Homey 1.0.4 6/20/2018
8 Eedomus
10 Vebund
11 Domoticz V3.5877
12 Homeseer 3.0.0.368 I2 and I3 need manual configuration. Very inconsistent updates, updates  change after reinclusion without changing the parameters. 3/1/2018
13 Piper Cannot include without temperature sensor.
14 Open zwave
15 Jeedom Associate your node 5.
16 Indigo 7 I2 and I3 need manual configuration. 1/18/2018
17 ImperiHome 1/24/2018
18 OpenHAB 2/1/2018
19 Zipatile
20 SmartThings 3rd party I2, I3 and multichannel support to be added.
21 Schwaiger 3.3.0 8/9/2018