Where to buy
Fill the form to download the product manual

Flush Dimmer – Compatibility specifications

At Qubino we are regularly executing compatibility tests of our devices with Z-Wave gateways from different manufacturers. Check the results in the table below.

NOTE: The compatibility table may not include the latest testing data, please check the last column for the date of the last test.

SupportsUnsupportedCheck commentTestingQ1, Q2, …Module physical outputI1, I2, …Module physical input
#GatewayDimmingWkWhI2 (physical input) UII3 (physical input) UITemperature sensorCommentsDate of test
1Zwave meWhen module is included without temperature sensor and no endpoint enabled single channel lifeline must be set.25/05/2018
3Fibaro HC Lite v 4.130I2 and I3 need manual configuration.21/05/2018
4Zipabox 1.3.2412/06/2018
5Vera edge v 1.7.35008/05/2018
7DevolokWh will be tested.
12Domoticz V3.5877
13Homeseer and I3 need manual configuration. kWh will be tested.
15Open zwave
16JeedomNeed to change command class 38 to 48.
17Indigo 7I2 and I3 need manual configuration. kWh will be tested.
18ImperiHomekWh will be tested.
21SmartThings 3rd partyWhen excluding the device, after using this handler, the device needs to be excluded via long reset. Additional sensor handlers need to be installed.
22Schwaiger 3.3.0Works only when both inputs enabled.28/05/2018