Where to buy
Fill the form to download the product manual

Flush Dimmer 0-10V – Compatibility specifications

At Qubino we are regularly executing compatibility tests of our devices with Z-Wave gateways from different manufacturers. Check the results in the table below.

NOTE: The compatibility table may not include the latest testing data, please check the last column for the date of the last test.

SupportsUnsupportedCheck CommentTestingQ1, Q2, …Module physical outputI1, I2, …Module physical input
#GatewayDimmingTemperatureI1 (physical input - used as sensor) UICommentsDate of test
1Zwave me25/05/2018
2Cockpit
3Fibaro HC Lite v 4.13021/05/2018
4Zipabox 1.3.24If input regulated by temperature sensor and temperature sensor is connected then only temperature sensor reports.12/06/2018
5Vera edge v 1.7.35008/05/2018
6SmartThings
7Devolo
8NETIChomeNeeds to be retested on latest version.
9Homey
10EedomusThe value of the analog sensor is not visible on Eedomus, but it can be used to control the value of the dimmer.
11Verbund
12Domoticz V3.5877
13Homeseer 3.0.0.368Sensor value report is wrong.
14Piper
15Open zwave
16Jeedom
17Indigo 7Regulated input does not regulate the output. Temperature shown after polling.
18ImperiHomeRegulated input does not regulate the output.
19OpenHab
20Zipatile
21Schwaiger 3.3.028/05/2018