Flush Shutter DC - Compatibility specification | Qubino
Where to buy

Flush Shutter DC – Compatibility specification

At Qubino we are regularly executing compatibility tests of our devices with Z-Wave gateways from different manufacturers.
Check the results in the table below.

Please note that the gateway (hub) compatibility was updated on 14.3.2018 and it may not include the latest testing data.

Support Unsupported Check Comment Testing Q1, Q2, … Module physical output I1, I2, … Module physical input
# Gateway Q1 (open/close) Q2 (open/close) Tilt W kWh Temperature Comments Date of last test
1 Zwave me
3 Fibaro HC Lite v 4.130
4 Zipabox 1.3.24 Shutter can be controlled only by setting percentage. No venetian mode possible. 6/11/2016
5 Vera edge v 1.7.350
6 SmartThing 000.021.00012 Temperature sensor support added in the future.
7 Devolo kWh will be tested. 2/23/2018
8 Cockpit
9 Homey 1.0.4
10 Eedomus
11 Vebund
12 Domoticz V3.5877 In domoticz UI set switch type to blinds percentage inverted for shutter and venetian blinds EU for slats. 3/26/2018
13 Homeseer 3.0.0.368 Devices sends wrong data. 3/19/2018
14 Piper
15 Open zwave
16 Jeedom
17 Indigo 7 No separate slates control in UI. 1/22/2018
18 ImperiHome 1/26/2018
19 OpenHAB Only in shutter mode. 2/7/2018
20 Zipatile
23 Schwaiger 3.3.0 For proper temperature display remove multichannel association in group 1 and set single channel association in group 1. Poll to update kWh. 8/14/2018