World's only invisible Z-Wave thermostat

FLUSH ON/OFF THERMOSTAT

The Qubino Flush On/Off thermostat is ideal for directly controlling electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor.

What is it used for?

The Qubino Flush on/off thermostat is ideal for directly controlling electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators, etc.

Electric radiators

The smallest of them all.

The Qubino Flush On/Off thermostat module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Energy wizard.

The Qubino Flush On/Off thermostat can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.4 W.

Remarkably versatile.

The Qubino Flush On/Off thermostat can operate across a wide temperature range, from a chilly -10˚C to a scorching 40˚C (14˚–104˚F).

The simplest installation.

Extremely small size and a specially designed casing mean that connecting the module inside a flush mounting box is simplicity itself. The installation process, tested and approved by professional electricians, consists of just three simple steps:

  1. Remove the switches from the box and disconnect the wires.
  2. Connect the wires to the Qubino module and insert it in the box.
  3. Fix the switches to the box.

on-off thermostat

Incredibly fast support. Free.

We know that when you need information you need it quickly. That is why we offer a live customer service helpline, where you can get instant answers to all your questions. Free. All our support and training is personalized and free of charge.

The most tested and most reliable module.

Qubino modules are "install-and-forget" products. Our products are made to last, so we only select and use top-quality electronic components. Our modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.

Technical specifications

Electrical diagram 230VAC Electrical diagram 24VDC

Power supply 110 - 230 VAC ± 10%
50 / 60 Hz, (24–30 VDC)
Rated load current of AC output (resistive load)* 1 X 10 A / 230 VAC
Rated load current of DC output (resistive load) 1 X 10 A / 30 VDC
Output circuit power of AC output (resistive load) 2300 W (230 VAC)
Output circuit power of DC output (resistive load) 240 W (24 VDC)
Power measurement accuracy P = 5 – 50 W, +/- 3 W
P > 50 W, +/-3%
Digital temperature sensor range -50° ~ +125°C, resolution 0.1°C
Digital temperature sensor cable length 1000 mm
Operation temperature -10° ~ +40°C
Distance up to 30 m indoors
(depending on building materials)
Dimensions (WxHxD) 41.8 x 36.8 x 15.4 mm
(packaging) (115 x 96 x 22)
Weight (including packaging) 48 g (64 g)
Electricity consumption 0.4 W
For installation in boxes Ø ≥ 60 mm or 2 M
Switching Relay

Supported Z-Wave Frequencies

ORDERING CODE FREQUENCY
ZMNHID1 868.42 MHz
ZMNHID2 921.42 MHz
ZMNHID3 908.42 MHz
ZMNHID4 869 MHz
ZMNHID5 916 MHz
ZMNHID8 865.2 MHz
Additional parameters for pros

Additional parameters for pros.

There are 32 additional parameters for expert users. Some of the most useful are:

  • Setting mono-stable or bi-stable switches
  • Saving the state of the relay after a power failure
  • Power reporting in Watts on power change

What do you get?

Practical blister packaging ensures lower cost of delivery.
The package contains 1 module and 1 user manual.

Package dimensions (WxHxD): 115 x 96 x 22 mm
Gross weight (including packaging): 64 g