Flush RGBW Dimmer - Technical specifications | Qubino
Where to buy

Flush RGBW Dimmer – Technical specifications

Technical specifications

Power supply 12 / 24V DC
PWM output frequency 488Hz
Rated output power 8A for single output channel,13A at max.(3,25A for R.G.B.W. single output channel is suggested)
Max load (e.g. halogen bulbs)

At 12V- 156W combined

At 24V- 312W combined

LED Indicator Red/Green *1
Operation temperature 0℃~40℃ (32 ~ 104°F)
Distance up to 30 m indoors (98 ft)
Dimensions (WxHxD) 40.5 mm x 32 mm x 14.5 mm / 1,60x1,26x0,57 in
Package dimensions (W x H x D) 79 mm x 52 mm x 22 mm / 3,11x2,05x0,87 in
Weight 28 g / 0.97oz
Gross weight (packaging included) 34 g / 1.20oz
Electricity consumption 12V: 0.48W; 24V: 0.72W
For installation in boxes

Ø ≥ 60 mm (2,36 in) or 2M (78,74 in),

depth≥ 60 mm (2,36 in)

Z-Wave Repeater Yes
*Warning: the Qubino RGBW dimmer operates at a low voltage (12VDC/24VDC). See the instructions in the manual.

Supported Z-Wave Frequencies

ORDERING CODE (MODEL NUMBER) Z-WAVE FREQUENCY
ZMNHWD1 868.4 MHz
ZMNHWD2 921.4 MHz
ZMNHWD3 908.4 MHz
ZMNHWD4 869,0 MHz
ZMNHWD5 916,0 MHz
ZMNHWD6 868,4 MHz
ZMNHWD7 919,8 MHz
ZMNHWD8 865,2 MHz
ZMNHWD9 922,5 MHz
ZMNHWDA 919,7 – 921,7 – 923,7 MHz
ZMNHWDB 868,1 MHz
ZMNHWDC 868,1 MHz
ZMNHWDD 919,8 MHz
ZMNHWDE 920,9 MHz

Configuration Parameters

Parameter no. 1 – Input IN1 configuration

Available configuration parameters (size is 1 Byte DEC)

  • Default value: = 4 (BRIGHTNESS mode – momentary switch type)

  • 1 – NORMAL mode – momentary switch type

  • 2 – NORMAL mode – toggle switch type

  • 3 – NORMAL mode – toggle with memory switch type (exp. Motion sensor)

  • 4 – BRIGHTNESS mode – momentary switch type

  • 5 – BRIGHTNESS mode – toggle switch type

  • 6 – BRIGHTNESS mode – toggle with memory switch type (exp. Motion sensor)

  • 7 - RAINBOW mode – momentary switch type

  • 8 – SCENE mode – momentary switch type

  • 9 – SCENE mode – toggle switch type

  • 10 – SCENE mode – toggle with memory switch type (exp. Motion sensor)

Parameter no. 2 – Input IN2 configuration

Available configuration parameters (size is 1 Byte DEC)

    • Default value: = 7 (RAINBOW mode – momentary switch type)
    • 1 – NORMAL mode – momentary switch type

    • 2 – NORMAL mode – toggle switch type

    • 3 – NORMAL mode – toggle with memory switch type (exp. Motion sensor)

    • 4 – BRIGHTNESS mode – momentary switch type

    • 5 – BRIGHTNESS mode – toggle switch type

    • 6 – BRIGHTNESS mode – toggle with memory switch type (exp. Motion sensor)

    • 7 - RAINBOW mode – momentary switch type

    • 8 – SCENE mode – momentary switch type

    • 9 – SCENE mode – toggle switch type

    • 10 – SCENE mode – toggle with memory switch type (exp. Motion sensor)

Parameter no. 3 – Input IN3 configuration

Available configuration parameters (size is 1 Byte DEC)

  • Default value: = 8 (SCENE mode – momentary switch type)

  • 1 – NORMAL mode – momentary switch type

  • 2 – NORMAL mode – toggle switch type

  • 3 – NORMAL mode – toggle with memory switch type (exp. Motion sensor)

  • 4 – BRIGHTNESS mode – momentary switch type

  • 5 – BRIGHTNESS mode – toggle switch type

  • 6 – BRIGHTNESS mode – toggle with memory switch type (exp. Motion sensor)

  • 7 - RAINBOW mode – momentary switch type

  • 8 – SCENE mode – momentary switch type

  • 9 – SCENE mode – toggle switch type

  • 10 – SCENE mode – toggle with memory switch type (exp. Motion sensor)

Parameter no. 4 – Input IN4 configuration

Available configuration parameters (size is 1 Byte DEC)

  • Default value: = 1 (NORMAL mode – momentary switch type)

  • 1 – NORMAL mode – momentary switch type

  • 2 – NORMAL mode – toggle switch type

  • 3 – NORMAL mode – toggle with memory switch type (exp. Motion sensor)

  • 4 – BRIGHTNESS mode – momentary switch type

  • 5 – BRIGHTNESS mode – toggle switch type

  • 6 – BRIGHTNESS mode – toggle with memory switch type (exp. Motion sensor)

  • 7 - RAINBOW mode – momentary switch type

  • 8 – SCENE mode – momentary switch type

  • 9 – SCENE mode – toggle switch type

  • 10 – SCENE mode – toggle with memory switch type (exp. Motion sensor)

Parameter no. 5 – Auto Scene Mode Set

Available configuration parameters (size is 1 Byte DEC)

  • Default value 1

  • 1 – Ocean (soft flowing between shades of blue colour)

  • 2 – Lightning (fast flashing of white colour)

  • 3 – Rainbow (flowing between colours of rainbow)

  • 4 – Snow (flowing between shades of white and cyan colour)

  • 5 – Romantic (soft flowing of the red colour)

  • 6 – Party scene (random flashing between colours)

Parameter no. 6 – Auto Scene Mode – Duration between Colour change

This parameter is used to adjust time between 2 Colours in the Scene

Available configuration parameters (size is 2 Byte DEC)

  • Default value 3

  • 1-127 – delay duration is 1 sec to 127 sec

  • 1001-1127 – delay duration is from 1 min to 127 min. This parameter has no effect on Lighting and Party Scene.

Parameter no. 7 – Memorize device status at power cut

Device will be set to status memorized before power cut.

Available configuration parameters (size is 1 Byte DEC)

  • Default value 0

  • 0 – device does not memorize its status at power cut. Load is disconnected

  • 1 – device memorizes its status at the power cut. Load will be set to the status from before power cut

Parameter no. 8 – Automatic turning off output after set time

Output is turned automatically off after the time, set in this parameter.

Available configuration parameters (size is 2 Byte DEC)

  • Default value 0

  • 0 – Auto OFF disabled

  • 1 – 32536 = 1 second – 32536 seconds Auto OFF

Parameter no. 9 – Automatic turning on output after set time

Output is turned automatically on after the time, set in this parameter.

Available configuration parameters (size is 2 Byte DEC)

  • Default value 0

  • 0 – Auto ON disabled

  • 1 – 32536 = 1 second – 32536 seconds Auto ON

Parameter no. 10 – MAX dimming value

Available configuration parameters (size is 1 Byte DEC)

  • Default value 99

  • 2-99 = 2 % – 99 %

Parameter no. 11 – MIN dimming value

Available configuration parameters (size is 1 Byte DEC)

  • Default value 1

  • 1-98 = 1 % – 98 %

NOTE: The minimum level may not be higher than the MAX dimming value.

Parameter no. 12 – Dimming time (soft on/off)

Available configuration parameters (size is 1 Byte DEC)

  • Default value 10 = 1 s

  • 5 – 25 = from 0.5 to 2.5 seconds

Parameter no. 13 – Dimming time when key pressed

Available configuration parameters (size is 1 Byte DEC)

  • Default value 3 = 3 s

  • 1 – 127 = from 1 to 127 seconds

NOTE: Dimming time depends also on Min and Max dimming value.

Parameter no. 14 – 4 Dimmers mode

Available configuration parameters (size is 1 Byte DEC)

  • Default value: = 0 (4 dimmers mode disabled)

  • 0 – Four dimmers mode disabled

  • 1 – Four dimmers mode enabled – momentary switch type

  • 2 – Four dimmers mode enabled – toggle switch type

  • 3 – Four dimmers mode enabled – toggle with memory switch type

NOTE: If the parameter no. 14 is enabled, parameter no. 1,2,3,4 has no effect.

NOTE: After parameter change, first exclude device (without setting parameters to default value) and then re include the device.

Electrical diagram

12/24V Input for 12VDC or 24VDC (+)
GND Ground (-)
IN1 Push button – Brightness control (in default configuration)
IN2 Push button – Rainbow mode (in default configuration)
IN3 Push button – Scene mode (in default configuration)
IN4 Push button – Normal mode (in default configuration)
Red Output for R wire of LED strip or bulb in 4 Dimmers mode
Green Output for G wire of LED strip or bulb in 4 Dimmers mode
Blue Output for B wire of LED strip or bulb in 4 Dimmers mode
White Output for W wire of LED strip or bulb in 4 Dimmers mode
S Service button (used to add or remove device from the Z-Wave network)

Package content

1 device + 1 user manual.
Practical blister packaging ensures lower cost of delivery.
Package dimensions (WxHxD): 79 x 52 x 22 mm
Gross weight (including packaging): 34 g